Bottle Jack Neck Extensions

Bottle Jack Neck Extensions

Included in the new Roadsafe Jack accessory program is the Bottle Neck Extensions.

Brand :Roadsafe Automotive

$27.27 AUD

Pay in 4 with

available on orders over $30.00

or 4 payments of $6.82 with

Select Type:

Info
Video
Install
Specs

Any warnings, precautions and instructions noted on this sheet, or any other information sheets provided with regard to the use of the Roadsafe 4WD ram extensions & associated products cannot cover all possible situations or conditions that may occur during the use of the product. The use of these items must understand that caution and common sense are important factors that we cannot build into this product, and must be supplied by the end user.

WARNING—Do not allow anyone in or near the vehicle while using a jack. This practice will make jacking highly unstable. Any sudden movements and shifts in weight will result in instability. Keep all personnel a safe distance away from the vehicle. WARNING—Do not attempt to lift any vehicle on a longitudinal or side slope. The vehicle can slide or roll causing severe injury or death. Always ensure the vehicle is on flat, even ground prior to any attempt at lifting.

WARNING—Always ensure you follow correct jacking practice and manufacturers instructions with regard to the correct use of a jack, including but not limited to, ensuring the vehicle is turned off, the transmission is engaged in the appropriate setting commonly PARK (for Auto) or Low (1st) gear (for manual) - and that the wheels are blocked diagonal to the wheel being lifted, with satisfactorily size wheel chocks. Where the ram extension is being used on bottle jacks with adjustable screw tops, is imperative that all extensions or pads must have at least 13mm of engagement down onto the bottle jack ram. Extending the screw out too far, resulting in less than 13mm contact with the ram, will cause the extension or pad to become unstable.

Extensions & Top Plates have been designed standard with 35.5mm ID to suit for a 28-35mm ram OD. Adaptors available to suit for 35.5-39.5mm, 40-44.5mm & 45-49.5mm size rams.

Bottle Jack extension included for display purposes only.

To view the entire Road Safe range of products, see the catalogue below:
Road-Safe-4wd-Catalogue.pdf (29.4 MB)

Tough Toys Installation

Tough Toys partners with a workshop in Moorooka in QLD for installation of our 4x4 accessories. We can also arrange direct shipping to your preferred workshop anywhere in Australia.

Do you own a workshop doing fitting and installation work? We're looking for partners like you to install our products and accessories on our customers vehicles.

Installation Recommendations

We strongly recommend having vehicle accessories products installed by a professional workshop for the best results and to ensure proper operation.

Additionally, please be aware that the installation of aftermarket modifications to your vehicle may affect its compliance with local road use regulations. We advise you to consult with your local authorities and verify the necessary certification or compliance requirements to remain legal for on-road use of your vehicle.

Product Specifications

Shipping Dimensions (LWH)	220mm x 450mm x 220mm
Shipping Weight	800 grams

Product Availability

Experience fast fulfillment with our products, with most orders typically ready to ship within 2-3 days of purchase. While we strive for efficiency, occasional delays may occur, and we appreciate your understanding as we work to get your order to you as quickly as possible.

Please contact us for all product enquiries, stock availability, order status, product suitability or anything needed urgently, and we'll be happy to help.